Operation diagram of SOLARCITY 20 KWP 3 PHASE SOLARCITY BATTERY SYSTEM
Operating principle SOLARCITY 20 KWP 3 PHASE SOLARCITY BATTERY SYSTEM
– The electricity obtained from the battery panel (Solar Panel) is DC, via the grid tie (Grid Tie Inverter), with the function of converting DC – AC electricity in the same phase with the same frequency as the grid, then the system will be In conjunction with the grid:
+ When the grid capacity is equal to the load capacity, the load consumes completely electricity from solar cells.
Choosing the right SOLARCITY 20 KWP 3 PHASE SOLARCITY BATTERY SYSTEM
Grid system is open system, system capacity does not depend on the load capacity used.
For example: An office with a capacity of 10KW / h. Use from 8 am – 4 pm. Total electricity used is: P = 10 * 8 = 80KW:
– If the office invests in a 10KW grid system, the amount of electricity connected to the grid per day is about 40KW, counting 8 hours of sunshine (depending on sunny conditions in each region). The amount of electricity saved about: 40/80 = 50% of power consumption
– If the office invests in a 20KW grid system (maximum), then the amount of electricity connected to the grid is about 80KW / day (average in Vietnam 1 day 8h peak sunshine). The amount of electricity saved in a day is about: 80/80 = 100% of the electricity consumed.
SOLAR BATTERY SYSTEM 20 KWP 3 PHASE includes the following devices:
|Poly 310w solar panels||
|Ministry Grid on Grid Tie Inverter 20Kwp (400 V ~ 800 VDC)||
5/7/10/15 years (optional)
|Origin||Indochina International Electronics Co., Ltd. – solarcity.vn|
Some photos of the project have been taken
Project 20KwP Di An – Binh Duong
Project 15Kwp Q12 – HCMC
Project of 8Kwp Phu Long – Binh Duong
Ba Ria – Vung Tau 5Kwp Project
Customers wishing to contact the hotline 0909 296 297 or the nearest agent for support, free advice.
Chưa có đánh giá nào.