It is a device that performs the function of regulating the battery’s charge , protects the battery against overloading and over-discharge to enhance the life of the battery, and helps the solar system to use effectively. fruit and lasting. – The controller also shows the charge status of the solar panel on the battery to help users control the loads. – The controller also performs protection against overvoltage (> 13.8V) or low voltage (<10.5V). The controller protection circuit will perform a circuit break when the controller confirms that the battery is fully charged or the battery voltage is too low.
Instruction manual & connection diagram:
– Use within the range of machine specifications.
– Carefully observe the input and output terminals before connecting the pole (+) to the pole (+), the pole (-) against the pole (-).
– Led lights show:
+ Led charging indicator:
Lights off: No charging, no connection to solar panels or weak sunlight
Light on: The indicator is charging
Flashing light: Full battery indicator or charging indicator
+ Led battery capacity indicator :
Green indicator light: Full alert
Yellow indicator LED: Normal report
Red indicator light blinks: Low voltage protection for the battery
+ Led download notification:
Open leds: Download
Led off: Download
Led light blinks: Off load, output overload or short circuit
Specifications
| Model |
PWM2024B |
|
| Battery input voltage MT |
12VDC (Maximum open-circuit voltage of 21V Max.) |
|
| Charging line |
20A max. |
|
| Output voltage load |
12V / 24 DC (according to battery voltage) |
|
| Output current load |
20A max |
|
| Loss line |
25 mA |
|
| Charging disconnection threshold (battery is full) |
Vbatt ≥14.5V ± 2% |
|
| Recharge |
Vbatt ≤ 13.6 V ± 2% |
|
| Protect | Overload |
I load> 20A Protection by fuse |
| Battery low voltage |
Vbatt ≤ 10.2V ± 2% Automatically cuts off the output voltage |
|
| LED display |
Solar signal is on (green) |
|
|
With DC power out load (bright yellow LED) |
||
|
Overload / Low Pitch (yellow LED is off) |
||
|
Tank Capacity: Full (Full) / Normal (Normal) / Empty (Empty) |
||
| Dimensions (mm) |
170 x 120 x 40 |
|
| Weight |
0.5 kg |
|
| Guarantee |
01 month |
|
Picture

Application
– Control charging and regulating the battery charge in the solar power system, supplying electricity to household electric equipment such as lighting, televisions, CD players, Video systems, computer stands, telephone exchange, computers fax, fan, water pump, internet or company, office building …
Application model for non-chargers for batteries from the national 220v power grid, only use from 12v to 220vac batteries :

LƯU Ý : Mọi thông số trên tất cả các sản phẩm của Website đều mang tính chất tham khảo theo thuyết tương đối và hoàn toàn có thể thay đổi mà không báo trước

Bơm năng lượng mặt trời 2HP | Bơm hỏa tiễn 1500w
CB đóng ngắt AC 1pha 63A
Thiết bị chống sét DC 1000V
Bộ Điều Khiển Sạc Năng Lượng Gió Kết Hợp 20A
Bộ Điều Khiển Sạc Điện Gió 120V / 3Kw - 900W
Điều Khiển Sạc Năng Lượng Gió Và Pin Mặt Trời 48V 2Kw – 600W
Máy bơm hỏa tiễn 4 inch cánh nhựa VERATTI 4VR16/9-2.2 3HP
Bộ Điều Khiển Sạc Điện Gió 1KW / 48V
Bộ Điều Khiển Sạc Năng Lượng Gió 600W / 24V
Điều Khiển Sạc Năng Lượng Mặt Trời OS PWM C1012 10A/12V
BƠM HOẢ TIỄN VERATTI 220v 3VRM2.5/21-0.75 (3 INCH)
Bộ Điều Khiển Sạc Năng Lượng Mặt Trời PWM4048A - 48V/40A LCD
BƠM HOẢ TIỄN 4 INCH 220v CÁNH NHỰA VERATTI 4VRM4/8 - 0.75
Máy bơm hỏa tiễn 4 inch cánh nhựa VERATTI 4VRM6/14-1.5 2HP
Đầu nối pin mặt trời MC4 -2T (không dây)
96V / 2KW-600W WIND TURBINE AND SOLAR CHARGE CONTROLLER
ĐẦU NỐI PIN MẶT TRỜI MC4 – 5T
MÁY BƠM HỎA TIỄN 4 INCH - 220V VERATTI 4VRM6/11-1.1 1.5HP
Bộ Điều Khiển Sạc Điện Gió NLMT Solar 48V / 3Kw - 900W 

